Village Ace Hardware in Sandwich Illinois had a problem.  The roll-formed pallet rack they were using for outdoor storage was old, rusting, and becoming a hazard. We recommended replacing it with a structural galvanized selective [...]

Here at RMH Systems, we've been committed to serving our customers with only the highest quality solutions and service for almost twenty consecutive years. After nearly two decades, we still hold true to the foundation [...]

I don’t know about you but everywhere I look these days I’m seeing an increase in shipping charges and news about trucker shortages.  As a result, we here at RMH have been paying closer attention [...]

General Converting Incorporated, a Bolingbrook Illinois company specializing in the design and manufacture of custom packaging and point-of-purchase displays, reached out to RMH Systems for help in improving the storage for their printing dies.  By [...]

If you haven’t made any significant changes to your distribution center lately you may not have noticed that local government inspections for new rack installations have been increasing.  Along with this trend (and probably as [...]

Truckloads of Surplus Beams Available Interlake recently had an over-run on some of their 47E beams and when we learned about it, we jumped on it so that our Dealer community can benefit. These are [...]

I don’t know about you, but very few of the warehouses and distribution centers that I’ve ever been in have implemented load capacity and compliance signage on their rack installations.  That said, there are specific [...]

We’re happy to announce that RMH Systems is now stocking Carton Flow from Mallard Manufacturing. Cart-Trak Carton Flow is a heavy-duty full-width roller system that is abuse-resistant, energy-efficient, and maintenance-free. [...]

I was working on placing a new Ridg-U-Rak stock order last week and ran into a problem where I couldn’t find the shims I ordinarily order. After some investigation, I found them but they weren’t [...]

Which Upright Column Should Face the Aisle? Believe it or not, under most circumstances, it’s more of a philosophical question than an engineering one. Unless you’re using  “X” braced or strapped frames, they’ll have the [...]

As part of our ongoing celebration of the 20th anniversary of RMH Systems and to help MHEDA celebrate its 60th anniversary, we’ve taken out a full-page ad in the 2014 Third Quarter MHEDA Journal. All [...]

As I mentioned in last week’s blog post, this new edition contains more competitive prices for the most popular and common rack products, including Interlake and Ridg-U-Rak frames and beams as well as our wire [...]

All the RMH Project Managers use CAD and our talented CAD Department to design and layout projects for customers just like you. As you’ll see in the video below, we know that drawings improve projects [...]

You probably haven’t given it much thought, but behind the scenes here at RMH we’re always working with our manufacturers so that we can offer you the best possible pricing along with the excellent service [...]

Flanged Crossbar 1.  While manufacturers may draft capacities for their pallet supports, they don’t actually add capacity to the beam level.** 2.  Like wire decking, pallet supports are not designed for point or impact loading. [...]

Like you, we pay attention to what’s going on in the industry and we’ve noticed recently that some people have a funny idea of what the word “quick” means. Around here, the “quick” in quick-ship [...]

Back in April, our good friends from Ridg-U-Rak came out to RMH to hang out with us and introduce their new impact damage control product. Already well known for innovative protection products like the Column [...]

We’re proud to announce that our friends and partners at Ridg-U-Rak have awarded RMH Systems their Baker’s Dozen Sales Award for 2013. The Baker’s Dozen Award is given to the top distributors of Ridg-U-Rak products [...]