Show mobile nav Show mobile nav

Truck Scales

We sell and install the leading electronic truck scales in the industry. Pioneered by Avery Weigh-Tronix, these scales are the benchmark for ruggedness and performance in everyday use. All truck scales feature the patented “Weigh Bar Weight Sensor” for the most accurate measurements available with the least maintenance. Contact us to get detailed information for your specific needs.

We are a proud vendor of Avery Weigh-Tronix truck scales.

  • Steelbridge XT Truck Scale – Concrete Deck

    Manufactured by Avery Weigh-Tronix, the Steelbridge XT concrete deck truck scale is designed for high traffic and heavy loads.  This heavy duty vehicle scale has an extra rugged design and construction to withstand extreme use year after year.

    Additional Information

    • Can withstand heavy, frequent traffic - over 200 trucks a day for 25 years
    • 45 tons dual tandem axle capacity
    • Platforms lengths from 10' to 150'
    • Requires only minimal maintenance
    • Reliable even in adverse weather conditions
    See Complete Specifications

  • Pre-Fab Truck Scale Foundations

    Pre-Fab Truck Scale Foundations, in either steel or concrete, can be set into place in a matter of hours.  Should the scale need to move, there is no additional expense for building a new foundation. Just pick up the foundation and take it with you.  A Pre-Fab foundation can cut time and labor from your next truck scale installation. Just unload, assemble and start weighing.

    Additional Information

    Avery Weigh-Tronix Pre-Fab Truck Scale Foundations, in either steel or concrete, remove most of the complexities of truck scale installation.  The scale and foundation can arrive on the same truck on the same day to be set into place in just hours.

     

    And should the scale need to move, there is no additional expense for building a new foundation. Just pick up the foundation and take it with you.

     

    See Complete Specifications

  • LP8 Low Profile Truck Scale

    Manufactured by Avery Weigh-Tronix, the BM LP8 low profile truck scale is an ideal replacement scale for worn out scales on existing foundations.  Its high strength and extra low profile design (11” – 14” elevation) make it an easy fit to replace other brands of truck scale.

    Additional Information

    • Typical platform lengths from 15' to 17.5'.  Combine to reach 120'
    • 45 ton dual tandem axle capacity
    • 45 - 135 ton total capacity
    • Low cost installation
    See Complete Specifications

  • Bridgemont Standard Duty Truck Scale – Steel Deck

    Manufactured by Avery Weigh-Tronix, the BMS SD truck scale suits applications with moderate traffic and axle loads up to highway limits.  This steel deck vehicle scale is cost effective without compromising on quality.

    Additional Information

    • Platform lengths from 10' to 120'
    • 35 ton dual tandem axle capacity
    • 40 - 135 ton total capacity
    • Ideal for most truck scale applications
    • Approved for livestock weighing
    See Complete Specifications

  • Bridgemont Heavy Duty Truck Scale HD – Steel Deck

    Manufactured by Avery Weigh-Tronix, the BMS HD truck scale is a heavy duty vehicle scale with a checkered steel deck driving surface.  This rugged scale is ideal for users who require long-lasting performance for moderate to heavy traffic and axle loads.

    Additional Information

    • Our most popular truck scale for everyday use
    • Platform lengths from 10' to 150'
    • 35-45 tons dual tandem axle capacity
    • 135 ton total capacity
    • Ideal for most truck scale applications
    • Approved for livestock weighing
    See Complete Specifications

  • Grain Dump Module System

    Manufactured by Avery Weigh-Tronix, this grain dump system contains an easy-flow grate to allow trucks to weigh and dump over a BridgeMont scale.

    The dump module is designed for use with standard BridgeMont series steel and concrete deck truck scales. One or two grain dump modules may be combined with standard BridgeMont modules to create a complete truck scale with bottom grain dump capability. Constructed of heavy steel tubing frame, checkered steel deck plate, and removable grain slats, these modules come standard with stainless steel sheathed cable. Each module comes factory assembled.

    Additional Information

    • designed for use with standard BridgeMont series Steel and Concrete deck truck scales
    • Constructed of heavy steel tubing frame, checkered steel deck plate, and removable grain slats, these modules come standard with stainless steel sheathed cable
    • Each module comes factory assembled
    See Complete Specifications

  • BridgeMont BMS-P Portable Truck Scale

    Avery Weigh-Tronix portable scales go anywhere there is an immediate need for on-site truck weighing — mining and timber operations, road construction, asphalt facilities, quarries or construction sites. They can also quickly ll the gap when other scales fail.

     

    Additional Information

    • Also available in IMXT-P series
    • 90,000 lb dual tandem axle capacity
    • 45 ton concentrated load capacity
    • "r" factor rating of 2.65
    • Installs or disassembles in as little as four hours
    • Install on bridge planks, concrete piers, concrete slab or swamp pad
    • Durable deck design to handle frequent moves
    • Same day delivery, installation and calibration
    • Weekly, monthly and seasonal rentals available
    See Complete Specifications

  • Steelbridge XT Truck Scale – Steel Deck

    Manufactured by Avery Weigh-Tronix, the Steelbridge XT truck scale is an extra rugged vehicle scale designed for heavy, frequent use in demanding environments.  This truck scale is rugged yet cost effective due to the structural integrity and efficiency of its design.  The sandwich steel deck design provides outstanding strength and durability.

    Additional Information

    • Can withstand heavy, frequent traffic - over 200 trucks a day for 25 years
    • 45 tons dual tandem axle capacity
    • Requires only minimal maintenance
    • Reliable even in adverse weather conditions
    See Complete Specifications

  • Bridgemont Heavy Duty Truck Scale – Concrete Deck

    Manufactured by Avery Weigh Tronix,the BMC HD is a heavy duty  truck scale for vehicle weighing.  Its concrete deck and steel substructure make the BMC very strong and very durable.  This concrete truck scale is ideal for situations with high traffic or heavy rain or moisture.

    Additional Information

    • Our most popular truck scale for everyday use
    • Platform lengths from 10' to 150'
    • 35-45 tons dual tandem axle capacity
    • 135 ton total capacity
    • Ideal for most truck scale applications
    • Approved for livestock weighing
    See Complete Specifications

Need more info or a quote?

Use this easy form and an RMH expert will get back to you as soon as possible.